Plumbing

Charlotte Pipe P-Trap with Solvent Weld Joint, 4 x 4 in, Hub x Hub, Schedule Rating: SCH 40, PVC, White

Used to connect vertical branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3 in meets ASTM D2949 or exceeds ASTM D2729. 4 in...

Oatey® integral floor drain with P-trap is available with an optional backwater device that transforms the drain into a backwater valve, allowing drainage while preventing sewage backup.

Used to connect horizontal branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3 in meets ASTM D2949 or exceeds ASTM D2729, 4 in...

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a quarter bend. 3 in meets ASTM D2949 or exceeds ASTM D2729. 4 in...

Designed to solvent weld to schedule 40 IPS PVC. Installs easily and is direct replacement for cast iron and die cast bell traps. Outlet 3 in schedule 30 socket or...

Solvent welds into fitting hub and adapts to male threaded plug for sewer lines, septic tank and seepage systems. Teflon thread tape is recommended for threaded joints. 3 in meets...

Adapts sewer pipe to standard male pipe threads for sewer lines, septic tank and seepage systems. Meets ASTM D3034.

Economical alternative to current mechanical closet flanges. Installs inside 4 in cast iron or PVC DWV pipe.

Charlotte Pipe Drum Trap, 3 x 6 x 1-1/2 in, Hub x Hub x Hub, 140 deg F Operating, PVC, White

PVC schedule 40 is highly durable, with high-tensile and impact strength. It is easy to install and has better sound deadening qualities than PVC schedule 40 DWV foam core. Installation...

Series 1002 designed for clay to cast iron or plastic. Specially formulated PVC compound positively seals any sewer and drain connection.

Series 1056 designed for cast iron, plastic, copper, steel or lead to cast iron, plastic, copper, steel or lead. Specially formulated PVC compound positively seals any sewer and drain connection.

FERNCO Pipe Coupling, Nominal Size: 6 in, Compression Connection, 4.3 psi, Operating Temperature: 120 deg F, PVC, Black, 6 in L

FERNCO 1055 Flexible Coupling, Nominal Size: 6 in, 4.3 psi, Operating Temperature: -30 to 140 deg F, PVC

Used with a vertical pipe stack to provide for above ground level access to piping for sewer lines, septic tank and seepage systems.

Series 1056 designed for cast iron, plastic, copper, steel or lead to cast iron, plastic, copper, steel or lead. Specially formulated PVC compound positively seals any sewer and drain connection.

Charlotte Pipe Repair Coupling, Nominal Size: 4 in, Hub Connection, Schedule Rating: SCH 40, PVC, White, Includes: (5) Repair Couplings

Solvent weld connects to 1-1/2 in Schedule 40 outlet for kitchen or lavatory.

Oatey Bell Trap Drains are designed for use in garage, patio or other outdoor areas to drain water to a well of the unit that serves as a trap to...

Plumb Pak Waste Arm, Nominal Size: 1-1/2 in, Slip Joint Connection, Wall Thickness: 22 ga, Brass, Includes: (3) Waste Arms

Series 1070 designed for polyethylene to plastic pipe. Available in 3 in, 4 in, 6 in and 8 in sizes. Connects corrugated polyethylene drainage and irrigation systems to sewer, drain...

Series 1059 designed for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing ideally good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with...

WATER-TITE Closet Flange, PVC, For: 3 in or 4 in SCH 40 DWV PVC Pipe

Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing ideally good fittings. Makes socket-to-socket connections easy and reliable. Can also be used...

Used to connect a branch line or vent at a change of direction in a larger vertical or horizontal pipe. The inlet is constructed to accept a 2 in fitting...

Used to form a removable closure. Teflon thread tape is recommended for threaded joints. 4 and 6 in meet ASTM D3034.

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called an eighth bend. Meets ASTM D3034.